Is Your Security Program Effective? 7 Must-Ask Questions
As we put the final touches on 2014 budgets, many security leaders are asking for more money now to keep “bad things” from happening later. CEOs and CISOs have done this dance for years. But today I see many business leaders asking, “What do we have to show for all of these information security investments? How do I know we’re spending the right amount? How do I know our security program actually works?”
This last question is especially tricky. You’ve either had a security breach or you haven’t. If you have had a major incident, were you unprepared or just unlucky to be targeted by a high-powered attacker? If you’ve not had a major breach, is that because of a good security strategy? Or did you just get lucky? Can you even know for sure?
The correct answer to these questions is: “Risk reduction as borne out by our risk management program.” I’ll explain what that looks like in a moment. But first, here are seven questions business leaders should ask their CISOs, and the answers that should worry them.
1. “How do I know our risk management program works?”
(Red-flag answers: “I don’t know,” or “We use X and X is a best-practice.”)
2. Do we have a defined risk management methodology?
(Red-flag answer: “No.”)
3. Where did our methodology come from? Which interdisciplinary techniques do we use?
(Red-flag answers: “We invented our own,” or “I don’t know.”)
4. How do we measure probability, frequency, and business impact? Do we use ranges of numbers?
(If the answer is “no,” you might be in possession of a red flag.)
5. Does our risk management methodology require detailed, calibrated estimates? Is the CSO/CISO calibrated?
(If the answer to either question is “no,” well, you know what color flag you have.)
6. Can the CSO/CISO explain the “base rate fallacy”?
(The answer should be “yes.”)
7. Do we measure probability, frequency, and impact with a scale, like “high,” “medium,” and “low”? Do we use risk matrices or heat maps to summarize risks?
(If the answer to both questions is “yes,” that’s a red flag. Gotcha!)
If you’ve asked these questions, chances are you’ve also gotten a lot of wrong answers. You’re not alone. Most companies use what I call a “qualitative” approach that, by definition, focuses on qualities, attributes, or characteristics of things. Examples include marking off checklists of compliance requirements, benchmarking the company with peers, and so forth. While easy to do, qualitative approaches by themselves don’t answer the important questions. Just because my peers are doing X, why does that make X the right approach for us?
You need a complementary “quantitative” approach that, by definition, focuses on numerical measurements that make it possible to answer our questions. For example:
Q: How can I know if a security investment is a good one?
A: First, measure the amount of risk reduction achieved by the investment. Second, find out if the investment increased risk in other areas. Third, measure the risk reduction per unit cost.
Good security investments not only reduce risk (and avoid increasing other risks), they optimize the balance between risk reduction and cost. Here’s a typical conversation:
CFO: “How do I know our security program actually works?”
CISO: “Because the expected loss from security-related events with those security investments in place is less than what it would be without them.”
CFO: “How so?”
CISO: “Take our investment in data-retention controls. Without these controls, we know that we will suffer an average of one loss event per year, and the cost of a loss incident is approximately $250,000, for an annual expected loss of $250,000 per year. With data retention controls, we know that we will suffer an average of one loss event per decade, while the cost of that loss incident remains the same, for an annual expected loss of 0.1 x $250,000/year = $25,000/year. So the risk reduction is $250,000/year – $25,000/year = $225,000/year.”
CFO: “Where did you get these numbers? How do you know the frequency of loss events with and without the security controls?”
CISO: “When it exists, we use historical data. When it doesn’t exist we use calibrated estimates. The people providing these numbers have gone through calibration training. Psychological studies have consistently shown that calibration training significantly improves the accuracy of people’s estimates.”
CFO: “How does it work?”
CISO: “Almost everyone is systematically biased toward overconfidence or underconfidence. Calibration training exposes people to their bias and teaches them how to avoid it. People learn, for example, how to estimate using ranges and confidence intervals. They will give a range of numbers, say, ‘one to 10 loss events per year,’ and a confidence interval (CI) of, say, 90%. The range simply means that the actual number of loss events per year is between one and 10. The 90% CI means that if the expert gave 10 estimates with a 90% CI, the ranges in nine of those estimates would contain the correct number.”
CFO: “OK, got it. But even with calibrated estimates, how do we know we’re investing the right amount?”
CISO: “We don’t want to get ‘the most security’ because that costs too much. Nor do we want ‘the cheapest security’ because that doesn’t consider risk reduction. Instead, we want the optimum balance between cost and risk reduction. So we measure the risk reduction per unit cost (RRPUC) of various options. For example, our data retention controls cost $11,000. So the RRPUC equals $225,000 divided by $11,000, or $20.45.”
RRPUC measures a proposed control’s cost-effectiveness at reducing risk. If the RRPUC is exactly one, then the proposed control isn’t any more cost-effective than no control at all. A ratio much greater than one, such as the $20.45 referenced above, suggests that the control is a good investment.
The beauty of the RRPUC approach is that it enables CxOs to compare options in a portfolio of proposed security investments. Suppose your CISO proposes four controls with the following metrics:
Table 1: Comparing Security Controls
If your security budget tops out at $300,000, control No. 2 is clearly the best option. If it’s $600,000, controls 2 and 3 would be a good combination. But if your budget is $1.2 million or greater, controls 1 and 4 may be poor investments because their RRPUC values are so low.
So let’s revisit our original questions.
“How do I know we’re investing the right amount?” You know that you are investing the right amount because the RRPUC approach forces you to balance risk reduction with cost.
“How do I know our security program actually works?” The RRPUC approach provides at least part of the answer because it shows that your security investments actually reduce risk.
I hope that more organizations will adopt an RRPUC approach when analyzing and managing their IT risks; you can get more info here. It’s the best way to retire those red flags.